The ETL listed to UL 458 standards AIMS 3000-Wattatt pure sine inverter charger has surpassed the ETL requirements and includes a 2-year warranty. This inverter is a combination of an inverter， battery charger and AC auto-transfer switch into 1 complete system with a peak DC and AC conversion efficiency of 92%. It is packed with unique features and it is 1 of the most advanced inverter chargers on the market today. It features power factor corrected， sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. The powerful battery charger is capable of 12-Volt at 100 Amp， and with power factor corrected， it uses 20% to 30% less energy from AC input than a standard charger， avoiding nuisance breaker trips or generator overloads. In response to the increasing demand of more advance battery charging， this model is equipped with Batter Temperature Sensing for increased charging precision. The overloads capacity is 300% of continuous output for up to 20-seconds to reliably support tools and equipment longer. The transformers have been consistently improved for years to achieve the best balance of conversion efficiency， idle consumption and minimum THD. The idle consumption of the line is ultra-low， roughly 1.5% of its rated power.

3000-Watt continuous power

9000-Watt surge power

12-Volt DC input

120-Volt AC output

Pure sine wave

Output Voltage: 100-Volt/110-Volt/120-Volt AC

Nominal efficiency: 92% plus (peak)

Line mode efficiency: 95% plus

Output frequency: 50 Hz plus/minus 0.3Hz / 60 Hz plus/minus 0.3Hz

Typical transfer time: 10 milliseconds (maximum)

Terminal output breaker / transfer load 30 Amp automatic

GFCI breaker: 15 Amp

Low battery alarm: 10.5-Volt DC to 11.0-Volt DC

Low battery trip: 10.0-Volt DC-10.5-Volt DC

Low battery Voltage restart: 13.0-Volt DC

Charger breaker / input 30 Amp

Idle consumption: 55-Watt

Power saver mode idle consumption: less than 21.7-Watt